|
1.
|
2025/11
|
Article
|
Essential Contents for a Flood Disaster Survival Kit: A Practical Guide for Malaysian Families Borneo Engineering & Advanced Multidisciplinary International Journal (BEAM) 4(2),pp.42-45 (Collaboration)
|
|
2.
|
2025/09
|
Article
|
A review of drilling performance of carbon fiber reinforced polymer (CFRP) Prceedings of International Conference on Design and Concurrent Engineering & Manufacturing Systems 1(1),pp.1-10 (Collaboration)
|
|
3.
|
2025/09
|
Article
|
A simulation-based line balancing study for a manufacturing company Proceedings of JSME Design & Systems Conference 2025 25(10),pp.1-10 (Collaboration)
|
|
4.
|
2025/09
|
Article
|
Comparative Study of Performance Difference Geometries Carbide Tool in Turning Titanium Alloy TI-6AL-4VELI 25(10) (Collaboration)
|
|
5.
|
2025/09
|
Article
|
Development of a Lean Manufacturing Tool Training System (LMTTS) for Lean Practitioner 日本機械学会 第35 回設計工学・システム部門講演会講演論文集 25(10),pp.1408-1-1408-10 (Collaboration)
|
|
6.
|
2025/09
|
Article
|
Development of Evaluation Frameworks for Lean Warehousing Models: A comprehensive review 25(10) (Collaboration)
|
|
7.
|
2025/09
|
Article
|
Nonlinear analysis of classic ballet movement and Kansei information using rough set theory Transactions of the JSME (in Japanese) 91(949),pp.1-12 (Collaboration)
|
|
8.
|
2025/06
|
Article
|
Motor Coordinated Display System: What We Have Learned from ARM-COMS Lecture Notes in Computer Science 1(15775),pp.50-60 (Collaboration)
|
|
9.
|
2025/03
|
Article
|
Effect of Sodium Chloride-Assisted Heat Treatment on Virgin and Recycled PLA Filaments in FDM 3D Printing Malaysian Journal on Composites Science and Manufacturing 16(1),pp.69-84 (Collaboration)
|
|
10.
|
2025/02
|
Article
|
Biocomposite Material Selection Criteria for Diverse Application: A Brief Review 生産システム部門研究発表講演会2024論文集 Vol.25(No.06),pp.41-46 (Collaboration)
|
|
11.
|
2025/02
|
Article
|
Evolution and Trends of Lean Warehousing: A Bibliometric Review 生産システム部門研究発表講演会2024論文集 Vol.25(No.06),pp.35-40 (Collaboration)
|
|
12.
|
2025/02
|
Article
|
Integrating TRIZ and Design Thinking: A Review of Methodologies and Applications 生産システム部門研究発表講演会2024論文集 Vol.25(No.06),pp.47-52 (Collaboration)
|
|
13.
|
2025/02
|
Article
|
Modular Sensor Architecture in Enhancing Decision Support Via IoT
Interchange for Line Balancing Production Line 生産システム部門研究発表講演会2024論文集 Vol.25(No.06),pp.1-6 (Collaboration)
|
|
14.
|
2025/02
|
Article
|
Using Lean Six Sigma to Improvement the Productivity of the Mark, Scan and Pack Process in the Semiconductor Industry Interchange for Line Balancing Production Line 生産システム部門研究発表講演会2024論文集 Vol.25(No.06),pp.7-12 (Collaboration)
|
|
15.
|
2024/11
|
Article
|
Preliminary investigation into the influence of green lean six sigma enablers on wastewater treatment operations Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.18(No.7),pp.1-11 (Collaboration)
|
|
16.
|
2024/11
|
Article
|
Preliminary investigation into the influence of green lean six sigma enablers on wastewater treatment operations Journal of Advanced Mechanical Design, Systems, and Manufacturing pp.JAMDSM0091-1-JAMDSM0091-7 (Collaboration)
|
|
17.
|
2024/10
|
Article
|
Effect of Filament Pre-Drying on the Microstructure and Porosity of 3D Printed PLA Journal of Advanced Research in Micro and Nano Engineering pp.85-94 (Collaboration)
|
|
18.
|
2024/09
|
Article
|
Analysis of Impressions of Classical Ballet Using Rough Set Theory The Proceedings of Design & Systems Conference 2022 pp.3309--1-3309--7 (Collaboration)
|
|
19.
|
2024/09
|
Article
|
Data Analytics-Based Decision Support System Model in Optimizing the Workstation Allocation for a Semiconductor Industry The Proceedings of Design & Systems Conference 2022 pp.2305--1-2305--8 (Collaboration)
|
|
20.
|
2024/07
|
Article
|
ARM-COMS Motor Display System for Active Listening in Remote Communication International Conference on Human-Computer Interaction 14691(1),pp.309-318 (Collaboration)
|
|
21.
|
2024/06
|
Article
|
Has Lean Manufacturing Remained Relevant In The Last Half A Decade? Journal of Human Capital Development (JHCD) Vol.17(No.1),pp.24-48 (Collaboration)
|
|
22.
|
2024/05
|
Article
|
How well do decision support systems help decision makers? An examination of adopting lean manufacturing processes Multidisciplinary Reviews Vol.7(No.8),pp.1-16 (Collaboration)
|
|
23.
|
2024/04
|
Article
|
An Innovative Approach Of Material Flow System For Motion Reduction In A Cast Manufacturing Firm Journal of Advanced Manufacturing Technology (JAMT) Vol.18(No.1),pp.57-71 (Collaboration)
|
|
24.
|
2024/03
|
Article
|
A Simulation-Based Decision Support System for Overall Equipment Effective (OEE) 生産システム部門研究発表講演会2024論文集 Vol.24(No.05),pp.7-12 (Collaboration)
|
|
25.
|
2024/03
|
Article
|
Bibliometric review on green lean six sigma based on Scopus database 生産システム部門研究発表講演会2024論文集 Vol.24(No.05),pp.1-6 (Collaboration)
|
|
26.
|
2024/03
|
Article
|
Problem Modelling for Biocomposite Automotive Headrests Conceptual Design by Using Theory of Inventive Problem Solving (TRIZ) 生産システム部門研究発表講演会2024論文集 Vol.24(No.05),pp.19-24 (Collaboration)
|
|
27.
|
2024/03
|
Article
|
Structural Performance Analysis of Electric Vehicle Strut Bar under Static Loading Condition Using Finite Element Method 生産システム部門研究発表講演会2024論文集 Vol.24(No.05),pp.13-18 (Collaboration)
|
|
28.
|
2024/02
|
Article
|
Development of an Educational Kit Using CAD Software for Simple Machine Learning Journal of Advanced Research in Applied Sciences and Engineering Technology Vol.44(No.2),pp.11-24 (Collaboration)
|
|
29.
|
2023/12
|
Article
|
Lateral Prefrontal Cortex Activation Induced by Proficient Skills During Rhythm Action Game Journal of Electronic Gaming and Esports Vol.1(No.1),pp.1-9 (Collaboration)
|
|
30.
|
2023/09
|
Article
|
A literature review on the effects of new sourcing strategies for labor shortages on production performance in malaysian manufacturing firms Proceedings of JSME iDECON/MS2023 2023(4),pp.1-10 (Collaboration)
|
|
31.
|
2023/09
|
Article
|
Cross-Cultural Teamwork Program for Japanese and Malaysian University Students Proceedings of JSME iDECON/MS2023 2023(21),pp.1-9 (Collaboration)
|
|
32.
|
2023/09
|
Article
|
Examining the Impact of Enablers on Green Lean Six Sigma Benefits in the Malaysian Wastewater Treatment Sector: A Pilot Study Proceedings of JSME iDECON/MS2023 2023(8),pp.1-10 (Collaboration)
|
|
33.
|
2023/09
|
Article
|
Feature classification by free description analysis using machine learning The Proceedings of Design & Systems Conference 2022 pp.3309--1-3309--7 (Collaboration)
|
|
34.
|
2023/09
|
Article
|
Implementing kaizen activities in casting manufacturing company by proposing placement design to capture waste Proceedings of JSME iDECON/MS2023 2023(3),pp.1-10 (Collaboration)
|
|
35.
|
2023/09
|
Article
|
The effect of cooling and lubrication on the cutting force during the milling process of Inconel 718 Proceedings of JSME iDECON/MS2023 2023(40),pp.1-4 (Collaboration)
|
|
36.
|
2023/07
|
Article
|
Coordinated Motor Display System of ARM-COMS
for Evoking Emotional Projection
in Remote Communication International Conference on Human-Computer Interaction 14015(1),pp.379-388 (Collaboration)
|
|
37.
|
2023/05
|
Other
|
Study on Biological Motion Generation Algorithms Inducing Emotional Projection OPU Forum 2023 pp.F02-F02 (Collaboration)
|
|
38.
|
2023/03
|
Article
|
Big Data and Simulation in Lean Manufacturing from the Industry 4.0 Perspective 日本機械学会・生産システム部門講演会論文集 Vol.23(No.10),pp.39-44 (Collaboration)
|
|
39.
|
2023/03
|
Article
|
Bimanual rotational movements in horizontal, frontal, and sagittal planes The IEICE Transactions on Electronics Vol.J106-D(No.5),pp.362-364 (Collaboration)
|
|
40.
|
2023/03
|
Article
|
Kanban Apps for Lean Practitioners 日本機械学会・生産システム部門講演会論文集 Vol.23(No.10),pp.33-38 (Collaboration)
|
|
41.
|
2023/02
|
Article
|
NIRS analysis on prefrontal cortex activity during rhythm action games 2nd OPU-HsH Japanese -German Symposium (OHJG-2023) 2023(1),pp.103-103 (Collaboration)
|
|
42.
|
2022/09
|
Article
|
Analysis of Difficulty on Bimanual Rotational Movements in Sagittal Plane The Proceedings of Design & Systems Conference 2022 pp.140301-140308 (Collaboration)
|
|
43.
|
2022/09
|
Article
|
Avatar motion generation based on AI speaker response and timing The Proceedings of Design & Systems Conference 2022 pp.340501-340508 (Collaboration)
|
|
44.
|
2022/09
|
Article
|
Change Management Approaches for Successful Lean Adoption 第32回設計工学・システム部門講演会講演論文集 Vol.32(1),pp.340101-340109 (Collaboration)
|
|
45.
|
2022/09
|
Article
|
Factor Analysis for Differences in Impressions of Contents by PET Bottle Shape The Proceedings of Design & Systems Conference 2022 pp.230301-230307 (Collaboration)
|
|
46.
|
2022/09
|
Article
|
Feasibility study of virtual student workshop 第32回設計工学・システム部門講演会講演論文集 Vol.32(ws1),pp.WS101-WS107 (Collaboration)
|
|
47.
|
2022/09
|
Article
|
Free descriptive analysis of Review evaluation using tf-idf method The Proceedings of Design & Systems Conference 2022 pp.230601-230304 (Collaboration)
|
|
48.
|
2022/09
|
Article
|
Kansei evaluation for the impression of emotional expression given to avatars The Proceedings of Design & Systems Conference 2022 pp.230701-230704 (Collaboration)
|
|
49.
|
2022/09
|
Article
|
Kansei evaluation on shape design and color of PET bottle The Proceedings of Design & Systems Conference 2022 pp.230201-230210 (Collaboration)
|
|
50.
|
2022/09
|
Article
|
NIRS Measurement on Visual Reaction Tasks for Analysis of Esports The Proceedings of Design & Systems Conference 2022 pp.140401-140405 (Collaboration)
|
|
51.
|
2022/08
|
Article
|
Real World Modelling beyond the Paradigm of Industrie4.0 and Society5.0 15th World Congress on Computation Mecchanics & 8th Asian Pacific Congress on Computation Mechanics 2022(1),pp.1-1 (Single)
|
|
52.
|
2022/06
|
Article
|
Natural Involvement to Video Conference through ARM-COMS International Conference on Human-Computer Interaction 13306(1),pp.238-246 (Collaboration)
|
|
53.
|
2022/05
|
Other
|
Basic Research on a Remote Communication System That Provides a Sense of Connection with Distant Participants OPU Forum 2022 pp.F19-F19 (Collaboration)
|
|
54.
|
2022/03
|
Article
|
Implementation of Overall Equipment Effectiveness (OEE) in Textile Manufacturing Company 日本機械学会・生産システム部門講演会論文集 Vol.22(1),pp.10201-10202 (Collaboration)
|
|
55.
|
2022/03
|
Article
|
Influence of a Verbal Load on a Sequential Timing Task Procs of the Neurocomputing Research Group of the IEICE pp.158-163 (Collaboration)
|
|
56.
|
2021/10
|
Article
|
Investigation of the parameters affecting Fitts' law on reciprocal arm movements Transactions of the JSME (in Japanese) Vo.87(No.903),pp.1-17 (Collaboration)
|
|
57.
|
2021/09
|
Article
|
Beyond the paradigm of Industries4.0 and Society 5.0 The Proceedings of Mechanical Engineering Congress, Japan 2021 pp.F011-01 (Single)
|
|
58.
|
2021/09
|
Article
|
Enhancing sustainability performance by cleaner production value stream mapping at soybean curd process Procs of Int’l Conf on Design and Conc Eng 2021 & Mfg Sys 2021 2021(P.No.52),pp.1-10 (Collaboration)
|
|
59.
|
2021/09
|
Article
|
Impression evaluation on behavior of avatar for AI speaker system The Proceedings of Design & Systems Conference 2021 pp.130601-130608 (Collaboration)
|
|
60.
|
2021/09
|
Article
|
Kansei evaluation on shape design of PET bottle The Proceedings of Design & Systems Conference 2021 pp.130701-130705 (Collaboration)
|
|
61.
|
2021/09
|
Article
|
Process Optimisation of Metal Stamping Production Line Through Value Stream Mapping and Time-Driven Activity-Based Costing Procs of Int’l Conf on Design and Conc Eng 2021 & Mfg Sys 2021 2021(P. No.51),pp.1-10 (Collaboration)
|
|
62.
|
2021/09
|
Article
|
Simulation model for Kansei evaluation on interactive robot behavior The Proceedings of Design & Systems Conference 2021 pp.130501-130508 (Collaboration)
|
|
63.
|
2021/07
|
Article
|
Ergonomic Design for Assembly Manufacturing Workstation Based on Universal Design Principles Lecture Notes in Networks and Systems, Vol.13(No.1),pp.870-877 (Collaboration)
|
|
64.
|
2021/07
|
Article
|
Ergonomic Design for Assembly Manufacturing Workstation Based on Universal Design Principles International Conference on Applied Human Factors and Ergonomics Vol.260(1),pp.870-877 (Collaboration)
|
|
65.
|
2021/07
|
Article
|
Smart Speaker Interaction through ARM-COMS for Health Monitoring Platform International Conference on Human-Computer Interaction HCII 2021, LNCS(LYNCS 12766),pp.396-405 (Collaboration)
|
|
66.
|
2021/06
|
Article
|
Analysis of the Interaction Torque on the Arm Based on Via-Point Movement Journal of Mechanical Engineering and Technology Vo.13(No.1),pp.10-24 (Collaboration)
|
|
67.
|
2021/03
|
Article
|
A proposal of performance measurement and management model for 5S sustainability in manufacturing SMEs: A Review Journal of Advanced Mechanical Design, Systems and Manufacturing Vol.15(No.2),pp.1-15 (Collaboration)
|
|
68.
|
2021/02
|
Other
|
Research Experience of Elementary School Students Participating in 'Hirameki☆Tokimeki Science' LED General Forum 2021 in Tokushima pp.P-22-P-22 (Collaboration)
|
|
69.
|
2020/11
|
Article
|
Improving Overall Equipment Effectiveness Using Lean Six Sigma in Lube Blending Plant: A Case Study 第30回設計工学システム部門講演会論文集 Vol.30(1),pp.221201-221010 (Collaboration)
|
|
70.
|
2020/11
|
Article
|
Investigation of the parameters affecting the Fitts' law on a reciprocal tapping task The Proceedings of Design & Systems Conference 2020 pp.130601-130610 (Collaboration)
|
|
71.
|
2020/10
|
Article
|
Health Management IoT System via Smart Speaker Interface Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 2020 pp.R20-26-02-05 (Collaboration)
|
|
72.
|
2020/10
|
Article
|
The Impact of Viscous Force Fields by Haptic Devices on Fitts' Law Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 2020 pp.R20-14-02-01 (Collaboration)
|
|
73.
|
2020/09
|
Other
|
Sensory Perception through Fatigue-Free LED Lighting The Proceedings of Mechanical Engineering Congress, Japan 2020 pp.F12105-F12105 (Single)
|
|
74.
|
2020/07
|
Article
|
A Revamp of the Internal Quality Auditing Process International Society for Transdisciplinary Engineering (ISTE) Vol.12(1),pp.678-687 (Collaboration)
|
|
75.
|
2020/07
|
Article
|
Motor control of hand force for visual indicator without hand displacement Procs of AHFE 2020 AHFE2020(1),pp.907-912 (Collaboration)
|
|
76.
|
2020/07
|
Article
|
Speech recognition approach for motion-enhanced display in ARM-COMS system 22nd International Conference on Human-Computer Interaction HCII 2020, LNCS(LYNX 12424),pp.135-144 (Collaboration)
|
|
77.
|
2020/05
|
Article
|
Data analytics supporting lean manufacturing towards industry 4.0 through simulation: a review Journal of Engineering and Management in Industrial System Vol.8(No.1),pp.46-53 (Collaboration)
|
|
78.
|
2020/03
|
Article
|
Optimizing the Changeover of Pressure Die Casting Machine by Implementing Single Minute Exchange of Die 生産システム部門研究発表講演会2020論文集 2020(1),pp.404-404 (Collaboration)
|
|
79.
|
2020/02
|
Article
|
Internet of things and simulation approach for decision support system in lean manufacturing Journal of Advanced Mechanical Design, Systems and Manufacturing Vol.14(No.2),pp.1-12 (Collaboration)
|
|
80.
|
2020/01
|
Article
|
Novel availability and performance ratio for internal transportation and manufacturing processes in job shop company Journal of Industrial Engineering and Management Vol.13(No.1),pp.1-17 (Collaboration)
|
|
81.
|
2019/12
|
Article
|
A proposal of integrated worker-monitoring system towards ergonomic manufacturing environment International Journal of Agile Systems and Management Vol.12(No.4),pp.437-452 (Collaboration)
|
|
82.
|
2019/12
|
Article
|
Cleaner production value stream mapping at a chromium plating plant: a case study International Journal of Agile Systems and Management Vol.12(No.3),pp.245-260 (Collaboration)
|
|
83.
|
2019/12
|
Other
|
Fatigue-Free LED Lighting through Flicker 第24回岡山リサーチパーク研究・展示発表会 pp.No.3-8-No.3-8 (Collaboration)
|
|
84.
|
2019/11
|
Article
|
An Attempt to Enhance Affinity through Tablet-Based Physical Interaction The Proceedings of IEEE Hiroshima Section Student Symposium 2019 pp.467-468 (Collaboration)
|
|
85.
|
2019/11
|
Article
|
Consideration of the Effect of Presented Information for Motivation in Exercise Habits The Proceedings of IEEE Hiroshima Section Student Symposium 2019 pp.434-436 (Collaboration)
|
|
86.
|
2019/11
|
Article
|
Health Management IoT System Using AI Speakers The Proceedings of IEEE Hiroshima Section Student Symposium 2019 pp.474-475 (Collaboration)
|
|
87.
|
2019/11
|
Article
|
Human-computer interaction through robotic-arm for active display Journal of Japan Society for Design Engineering Vol.54(No.11),pp.729-734 (Single)
|
|
88.
|
2019/11
|
Article
|
Learning the Forward Dynamics Model in Upper Limb Motion The Proceedings of IEEE Hiroshima Section Student Symposium 2019 pp.335-336 (Collaboration)
|
|
89.
|
2019/11
|
Article
|
Optimization Study of Boiler Operating Parameters for Thermal Power Generation The Proceedings of IEEE Hiroshima Section Student Symposium 2019 pp.208-209 (Collaboration)
|
|
90.
|
2019/11
|
Article
|
Shape definition and parameters validation through sheet metal feature for CNC dental wire bending International Journal of Computer Aided Engineering and Technology Vol.11(No.6),pp.763-777 (Collaboration)
|
|
91.
|
2019/11
|
Article
|
Study on Autonomous Navigation of Personal Mobility Using SLAM The Proceedings of IEEE Hiroshima Section Student Symposium 2019 pp.465-466 (Collaboration)
|
|
92.
|
2019/11
|
Article
|
The Impact of Interaction Torque in Motion Control The Proceedings of IEEE Hiroshima Section Student Symposium 2019 pp.337-339 (Collaboration)
|
|
93.
|
2019/11
|
Article
|
The Impact of Visual Information on Complex Virtual Space Motion with Haptic Feedback The Proceedings of IEEE Hiroshima Section Student Symposium 2019 pp.437-439 (Collaboration)
|
|
94.
|
2019/10
|
Other
|
Mechanism and Applications of Fatigue-Free LED Lighting 第40回岡山新材料技術融合フォーラム論文集 pp.1-2 (Collaboration)
|
|
95.
|
2019/09
|
Article
|
A proposal of performance assessment model for sustaining 5S implementation in SMEs manufacturing industry Proceedings of JSME iDECON/MS2019 2019(21),pp.1-13 (Collaboration)
|
|
96.
|
2019/09
|
Article
|
An integrated implementation framework of balanced scorecard and lean manufacturing for increasing efficiency and performance of SMEs Proceedings of JSME iDECON/MS2019 2019(20),pp.1-11 (Collaboration)
|
|
97.
|
2019/09
|
Article
|
Analysis of Movement Trajectories Focusing on the Interaction Torque in Arm Movements The Proceedings of Design & Systems Conference 2019 pp.140801-140810 (Collaboration)
|
|
98.
|
2019/09
|
Article
|
Decision making of single-minute exchange of die (SMED) in setup improvement through a simulation approach Proceedings of JSME iDECON/MS2019 2019(33),pp.1-10 (Collaboration)
|
|
99.
|
2019/09
|
Article
|
Enhancing electronic document control approval process through a verification stage Proceedings of JSME iDECON/MS2019 2019(31),pp.1-10 (Collaboration)
|
|
100.
|
2019/07
|
Article
|
Combination of Local Interaction with Remote Interaction in ARM-COMS Communication 21st HCI International Conference,, Proceedings, Part II HCII2019(LYNX12000),pp.347-356 (Collaboration)
|
|
101.
|
2019/01
|
Article
|
Improving electronic document control approval process through e-certification Journal of Advanced Manufacturing Technology Vol.1(No.3),pp.33-44 (Collaboration)
|
|
102.
|
2018/12
|
Article
|
A Simulation-based Study of Thermal Power Plant using a Fluid Dynamic Model and a Process Simulation Model Winter Simulation Conference 2018 2018(1),pp.4184-4185 (Single)
|
|
103.
|
2018/11
|
Article
|
IoT/AI approach towards understanding and utlization of tacit welding knowledge Proceedings of Japanese-German Symposium on IoT design, systems and applications 2018 2018(1),pp.9-9 (Single)
|
|
104.
|
2018/07
|
Article
|
Development of Working Posture Monitoring System for Ergonomic Manufacturing Work Environment, Proceedings of the 25th International Conference on Transdisciplinary Engineering (TE2018), 2018(1),pp.421-428 (Single)
|
|
105.
|
2018/07
|
Article
|
Experimental Observation of Nodding Motion in Remote Communication Using ARM-COMS, Lecture Notes in Computer Science No.LNCS(10904),pp.194-293 (Collaboration)
|
|
106.
|
2018/03
|
Article
|
A construction framework of decision support system for improving driving fatigue 日本機械学会生産システム部門研究発表講演会2018・講演論文集 Vol.18(No.4),pp.73-74 (Collaboration)
|
|
107.
|
2018/03
|
Article
|
A proposal of speech-driven entrainment-feedback towards smart vehicle system 日本機械学会生産システム部門研究発表講演会2018・講演論文集 Vol.18(No.4),pp.65-66 (Collaboration)
|
|
108.
|
2018/03
|
Article
|
A review of the recent advancements in automated dental wire bending 日本機械学会生産システム部門研究発表講演会2018・講演論文集 Vol.18(No.4),pp.61-62 (Collaboration)
|
|
109.
|
2018/03
|
Article
|
Development of an Automated Welding Machine Monitoring System Using AR The Proceedings of Manufacturing Systems Division Conference 2018 pp.63-64 (Collaboration)
|
|
110.
|
2018/03
|
Article
|
Development of ergonomic monitoring system for safe assembly task in manufacturing 日本機械学会生産システム部門研究発表講演会2018・講演論文集 Vol.18(No.4),pp.75-76 (Collaboration)
|
|
111.
|
2018/03
|
Article
|
Digital twin approach to building information management 日本機械学会生産システム部門研究発表講演会2018・講演論文集 Vol.18(No.4),pp.67-68 (Collaboration)
|
|
112.
|
2018/03
|
Article
|
Integration of CAD/CAM in developing the CNC dental wire bending machine Journal of Advanced Mechanical Design Systems and Manufacturing Vol.12(No.3),pp.1-12 (Collaboration)
|
|
113.
|
2018/02
|
Other
|
Development of a New LED Lighting Method Applicable to General Lighting and Plant Growth Lighting LED General Forum 2018 in Tokushima pp.1-1 (Collaboration)
|
|
114.
|
2018/01
|
Article
|
Cyber-physical motion of digital human model for connected society International Journal of the Digital Human Vol.2(No.1-2),pp.57-69 (Collaboration)
|
|
115.
|
2017/10
|
Article
|
Automatic extraction of vertices coordinates for CNC code generation for dental wire bending International Journal of Agile Systems and Management Vol.10(No.3/4),pp.321-340 (Collaboration)
|
|
116.
|
2017/09
|
Article
|
A concept for Design Support System of Automobile Suspension based on LEMIS Database 日本機械学会・第27回設計工学システム部門講演会2017・講演論文集 Vol.17(No.32),pp.250101-250107 (Collaboration)
|
|
117.
|
2017/09
|
Article
|
A Study of Biomechanical Factor for Driver Fatigue using Regression Model Procs of Int’l Conf on Design and Conc Eng 2017 & Mfg Sys 2017 Vol.17(No.205),pp.1-10 (Collaboration)
|
|
118.
|
2017/09
|
Article
|
Concurrent Engineering-based Team Working for Japan-Malaysia Academic Collaboration Procs of Int’l Conf on Design and Conc Eng 2017 & Mfg Sys 2017 Vol.17(No.205),pp.1-3 (Collaboration)
|
|
119.
|
2017/09
|
Article
|
Design a manual culf massager for prolonged standing workers by using ergonomic approach 日本機械学会・第27回設計工学システム部門講演会2017・講演論文集 Vol.17(No.32),pp.250501-250510 (Collaboration)
|
|
120.
|
2017/09
|
Article
|
Effect of vibration towards drivning fatigue and development of regression model based on vibration 日本機械学会・第27回設計工学システム部門講演会2017・講演論文集 Vol.17(No.32),pp.250601-250610 (Collaboration)
|
|
121.
|
2017/09
|
Article
|
Enhancing Manufacturing Efficiency through Excellence Operating System (EOS) Procs of Int’l Conf on Design and Conc Eng 2017 & Mfg Sys 2017 Vol.17(No.205),pp.1-7 (Collaboration)
|
|
122.
|
2017/09
|
Article
|
Ergonomic design chair for postpartum mothers Procs of Int’l Conf on Design and Conc Eng 2017 & Mfg Sys 2017 Vol.17(No.205),pp.1-9 (Collaboration)
|
|
123.
|
2017/09
|
Article
|
Ergonomics Study Of Working Postures In Demould Process At Aerospace Manufacturing Procs of Int’l Conf on Design and Conc Eng 2017 & Mfg Sys 2017 Vol.17(No.205),pp.1-10 (Collaboration)
|
|
124.
|
2017/09
|
Article
|
Feasibility study on B-code generation method for CNC dental wire bending operation Procs of Int’l Conf on Design and Conc Eng 2017 & Mfg Sys 2017 Vol.17(No.205),pp.1-11 (Collaboration)
|
|
125.
|
2017/09
|
Article
|
Head Motion Display for Remote Collaboration in Concurrent Engineering -Development of Face-image Pan-Title Display- Procs of Int’l Conf on Design and Conc Eng 2017 & Mfg Sys 2017 Vol.17(No.205),pp.1-6 (Collaboration)
|
|
126.
|
2017/09
|
Article
|
Image Segmentation to Design Semi-optimized Curve for B-code Generation 日本機械学会・第27回設計工学システム部門講演会2017・講演論文集 Vol.17(No.32),pp.250201-250210 (Collaboration)
|
|
127.
|
2017/09
|
Article
|
Robotic arm control based on MQTT-based remote behavior communication The Proceedings of Design & Systems Conference 2017 pp.120601-120607 (Collaboration)
|
|
128.
|
2017/09
|
Article
|
Visibility of customer demand and its impact in Overall Equipment Effectiveness (OEE) Procs of Int’l Conf on Design and Conc Eng 2017 & Mfg Sys 2017 Vol.17(No.205),pp.1-6 (Collaboration)
|
|
129.
|
2017/09
|
Other
|
Design with a Broad Perspective from Motion Control The Proceedings of Design & Systems Conference 2017 pp.WS03-WS03 (Collaboration)
|
|
130.
|
2017/07
|
Article
|
Eye-Tracking Analysis of User Behavior with an Active Display Interface Advances in Intelligent Systems and Computing Vol.585(1),pp.72-77 (Collaboration)
|
|
131.
|
2017/07
|
Article
|
Image-based active control for AEM function of ARM-COMS Lecture Notes in Computer Science No.LNCS 10273(1),pp.529-538 (Collaboration)
|
|
132.
|
2017/06
|
Article
|
B-code generation for a cnc dentistry wire bending mechanism International Symposium on Scheduling 2017 (ISS2017) 2017(1),pp.105-110 (Collaboration)
|
|
133.
|
2017/05
|
Article
|
Invisibility of impact from customer demand and relations between processes in Overall Equipment Effectiveness (OEE) Journal of Advanced Mechanical Design Systems and Manufacturing Vol.11(No.5),pp.1-11 (Collaboration)
|
|
134.
|
2017/04
|
Article
|
Duplicate complete dentures made by general digital devices: evaluation of material properties and clinical trial Annals of Japan Prosthodontic Society Vol.9(No.4),pp.357-364 (Collaboration)
|
|
135.
|
2017/03
|
Article
|
Hidden wastes in Overall Equipment Effectiveness in term of transportation between processes 日本機械学会生産システム部門研究発表講演会2017・講演論文集 Vol.17(No.8),pp.81-82 (Collaboration)
|
|
136.
|
2017/01
|
Article
|
Duplication of complete dentures using general-purpose handheld optical scanner and 3-dimensional printer: Introduction and clinical considerations: Journal of Prosthodontic Research Vol.61(No.1),pp.81-86 (Collaboration)
|
|
137.
|
2016/11
|
Article
|
Examination of Overall Equipment Effectiveness (OEE) in Term of Maynard's Operation Sequence Technique (MOST) American Journal of Applied Sciences Vol.13(No.11),pp.1214-1220 (Collaboration)
|
|
138.
|
2016/10
|
Article
|
Collaborative Design and Manufacturing of Prosthodontics Wire Clasp Proceedings of the 23th ISPE International Conference on Concurrent Engineering 2016(1),pp.421-428 (Collaboration)
|
|
139.
|
2016/10
|
Article
|
Robotic arm control based on MQTT-based remote behavior communication The Proceedings of Design & Systems Conference 2016 pp.1-8 (Collaboration)
|
|
140.
|
2016/10
|
Article
|
TMAC Design Workshop 2016 for academic collaboration The Proceedings of Design & Systems Conference 2016 pp.1-8 (Collaboration)
|
|
141.
|
2016/10
|
Article
|
TMAC Design Workshop Training Seminar 2016 for Global Education The Proceedings of Design & Systems Conference 2016 pp.1-8 (Collaboration)
|
|
142.
|
2016/10
|
Article
|
Verification of Sheet Metal based Wire Bending Procedures 日本機械学会設計工学システム部門講演会2016・講演論文集 Vol.16(No.1403),pp.1-6 (Collaboration)
|
|
143.
|
2016/09
|
Article
|
Wire bending using sheet metal feature for dentistry application Proceedings of International Design and Concurrent Engineering Conference 2016 (iDECON2016) 2016(No.104),pp.1-5 (Collaboration)
|
|
144.
|
2016/07
|
Article
|
Design of welded joint based on transient thermal condition Journal of Advanced Mechanical Design Systems and Manufacturing Vol.10(No.7),pp.1-8 (Collaboration)
|
|
145.
|
2016/07
|
Article
|
Emotional entrainment enhancement using an active display interface Advances in Affective and Pleasurable Design Vol.483,pp.563-569 (Collaboration)
|
|
146.
|
2016/07
|
Article
|
Motion control algorithm of ARMCOMS for entrainment enhancement Lecture Notes in Computer Science No.LNCS 9734,pp.339-346 (Collaboration)
|
|
147.
|
2016/05
|
Article
|
Preparation and properties of layer-by-layer K0.5Na0.5NbO3 thin films derived from sol-gel technique 13rd Intertnational Conference on Ceramic Processing Science 2016(1) (Collaboration)
|
|
148.
|
2016/03
|
Article
|
A review of computer-aided wire bending systems for prosthodontics and orthodontics 日本機械学会中国四国支部・第54期総会・講演会講演論文集 Vol.165(No.1),pp.50501-50502 (Collaboration)
|
|
149.
|
2016/03
|
Article
|
Aluminium Alloy Recycling for Sustainable Manufacturing 日本機械学会生産システム部門研究発表講演会2016・講演論文集 16(9),pp.50401-50402 (Collaboration)
|
|
150.
|
2016/03
|
Article
|
Comparativeevaluation of JSS using a simulation model The Proceedings of Conference of Chugoku-Shikoku Branch 2016 pp.50101-50102 (Collaboration)
|
|
151.
|
2016/03
|
Article
|
Development of a local interaction module for ARM-COMS 日本機械学会中国四国支部・第54期総会・講演会講演論文集 Vol.165(No.1),pp.50301-50302 (Collaboration)
|
|
152.
|
2016/03
|
Article
|
Hidden Wastes in Overall Equipment Effectiveness (OEE) under the study of Maynard's Operation Sequence Technique (MOST) Proceedings of 6th International Conference on Industrial Engineering and Oprations Management 450(1),pp.1563-1568 (Collaboration)
|
|
153.
|
2016/01
|
Article
|
3D prosthodontics wire bending mechanism with a linear segmentation algorithm Journal of Advanced Manufacturing Technology Vol.10(No.1),pp.33-46 (Collaboration)
|
|
154.
|
2015/09
|
Article
|
A proposal of ARM-COMS control based on the combination of local and remote interaction Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.12),pp.1-6 (Collaboration)
|
|
155.
|
2015/09
|
Article
|
A Proposal of Wire Bending Mechanism for Dentistry Applications Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.10),pp.1-8 (Collaboration)
|
|
156.
|
2015/09
|
Article
|
Agent-Based Communication in JADE Platform for Manufacturing Processes Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.8),pp.1-5 (Collaboration)
|
|
157.
|
2015/09
|
Article
|
Analysis of bottleneck processs impact on the whole processes in the production line Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.13),pp.1-5 (Collaboration)
|
|
158.
|
2015/09
|
Article
|
Design Analysis of Anti Crimping Roll Position Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.43),pp.1-8 (Collaboration)
|
|
159.
|
2015/09
|
Article
|
Design of Welded Joint based on Transient Thermal Condition Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.44),pp.1-8 (Collaboration)
|
|
160.
|
2015/09
|
Article
|
Development of New Cutter Design for Machining Thin Wall Aerospace Component 第25回日本機械学会設計工学システム部門研究発表講演会2015・講演論文集 2015.25(No.1304),pp.1-6 (Collaboration)
|
|
161.
|
2015/09
|
Article
|
Development of Variable Helix Cutter Design for Machining Thin Wall Aerospace Component Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.38),pp.1-10 (Collaboration)
|
|
162.
|
2015/09
|
Article
|
Effect of CNC Milling and EDM Die Sinking Process on Surface Roughness of Core Mould Surface Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.5),pp.1-6 (Collaboration)
|
|
163.
|
2015/09
|
Article
|
Feasible Study on Dental Restoration Using Time Compression Technologies Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.41),pp.1-7 (Collaboration)
|
|
164.
|
2015/09
|
Article
|
Implementation of TMAC Workshop for Global Design Education 第25回日本機械学会設計工学システム部門研究発表講演会2015・講演論文集 2015.25(No.1303),pp.1-6 (Collaboration)
|
|
165.
|
2015/09
|
Article
|
Malay articulation disorder diagnostic tool design by using Hidden Markov Model 第25回日本機械学会設計工学システム部門研究発表講演会2015・講演論文集 2015.25(No.1306),pp.1-6 (Collaboration)
|
|
166.
|
2015/09
|
Article
|
Malay Corpus Design for Articulation Disorder Patient for Early Screening Diagnosis Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.51),pp.1-11 (Collaboration)
|
|
167.
|
2015/09
|
Article
|
Modelling Effect of Cutter Geometrical Feature for Shoulder Milling Of Thin Deflecting Wall Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.39),pp.1-9 (Collaboration)
|
|
168.
|
2015/09
|
Article
|
Preparation of TMAC Workshop for Global Design Education 第25回日本機械学会設計工学システム部門研究発表講演会2015・講演論文集 2015.25(No.1302),pp.1-6 (Collaboration)
|
|
169.
|
2015/09
|
Article
|
Spreadsheet Application In Solving Engineering Problem: Development Of Shaft Alignment Program 第25回日本機械学会設計工学システム部門研究発表講演会2015・講演論文集 2015.25(No.1305),pp.1-6 (Collaboration)
|
|
170.
|
2015/09
|
Article
|
Surface roughness of common industrial material bars: Analysis of the influence of the feed rate Proceedings of International Design and Concurrent Engineering Conference 2015 (iDECON2015) 2015(No.17),pp.1-6 (Collaboration)
|
|
171.
|
2015/09
|
Article
|
TMAC Researeh and Education Units tovvardsacademic co 且laboration The Proceedings of Design & Systems Conference 2015 pp.1-6 (Collaboration)
|
|
172.
|
2015/09
|
Other
|
Globalization for Mutual Coexistence and Prosperity: Design and Management Aiming for Development with Local Industries The Proceedings of Mechanical Engineering Congress, Japan 2015 pp.W12100-W12100 (Single)
|
|
173.
|
2015/08
|
Article
|
ARM-COMS for entrainment effect enhancement in remote communication Procs of the ASME 2015 IDETC & CIE Conference 2015(No.47960),pp.1-6 (Collaboration)
|
|
174.
|
2015/07
|
Article
|
Cloud-based project supervision to support vitrual team for academic collaboration Proceedings of the 22th ISPE International Conference on Concurrent Engineering 2015(1),pp.81-90 (Collaboration)
|
|
175.
|
2015/07
|
Article
|
Scheduling of machining parameter to optimize productivity in medical implant fabrication International Symposium on Scheduling 2015 (ISS2015) 2015(1),pp.73-78 (Collaboration)
|
|
176.
|
2015/07
|
Article
|
Trade-off between material removal rate and productivity based on multi-objective optimization during milling Inconel 718 International Symposium on Scheduling 2015 (ISS2015) 2015(1),pp.67-72 (Collaboration)
|
|
177.
|
2015/03
|
Article
|
A Proposal of Cloud Manufacturing Architecture for Footwear Industry in Product Life Cycle Management 日本機械学会生産システム部門研究発表講演会2015・講演論文集 2015(1),pp.47-48 (Collaboration)
|
|
178.
|
2015/03
|
Article
|
Academic collaboration towards manufacturing system globalization The Proceedings of Manufacturing Systems Division Conference 2015 pp.45-46 (Collaboration)
|
|
179.
|
2015/03
|
Article
|
Customer demand and its impact on equipment utilization 日本機械学会生産システム部門研究発表講演会2015・講演論文集 2015(1),pp.53-54 (Collaboration)
|
|
180.
|
2015/03
|
Article
|
Finite Element Simulation of Trimming CFRP Composite with Cross-Nick Cutter 日本機械学会生産システム部門研究発表講演会2015・講演論文集 Vol.15(No.8),pp.49-50 (Collaboration)
|
|
181.
|
2015/03
|
Article
|
Modelling and Optimization of Cutting Parameter during Wire-EDM of Inconel 718 using Response Surface Methodology 日本機械学会生産システム部門研究発表講演会2015・講演論文集 Vol.15(No.8),pp.51-52 (Collaboration)
|
|
182.
|
2015/03
|
Article
|
StUdieson machine layoutdesigriusing JSP simulation The Proceedings of Manufacturing Systems Division Conference 2015 pp.55-56 (Collaboration)
|
|
183.
|
2014/12
|
Article
|
Overall equipment effectiveness estimation for priority improvement in the production line International Journal of Internet Manufacturing and Services Vol.3(No.4),pp.279-299 (Collaboration)
|
|
184.
|
2014/09
|
Article
|
A Review: The Potential of Powder Metallurgy in Recycling Aluminum Chips (Al 6061 & Al 7075) 日本機械学会設計工学システム部門研究発表講演会2014・講演論文集 2014.24(1),pp.230101-230108 (Collaboration)
|
|
185.
|
2014/09
|
Article
|
A technical review on the three challenges of ARM-COMS 日本機械学会設計工学システム部門研究発表講演会2014・講演論文集 2014.24(1),pp.230201-230208 (Collaboration)
|
|
186.
|
2014/09
|
Article
|
An initiative to implement lean manufacturing using value stream mapping in textile manufacturing company 日本機械学会設計工学システム部門研究発表講演会2014・講演論文集 2014.24(2409),pp.240901-240909 (Collaboration)
|
|
187.
|
2014/09
|
Article
|
Deposition of Catalyst and Catalyst-Support Thin Films for Aligned Carbon Nanotube Growth 日本機械学会設計工学システム部門研究発表講演会2014・講演論文集 2014.24(2304),pp.230401-230408 (Collaboration)
|
|
188.
|
2014/09
|
Article
|
Design and optimization of runner and gating systems for permanent mould casting 日本機械学会設計工学システム部門研究発表講演会2014・講演論文集 2014.24(2316),pp.231601-231607 (Collaboration)
|
|
189.
|
2014/09
|
Article
|
Effect Cutting Parameters on Surface Roughness during End Milling of AISI D2 Tool Steel 日本機械学会設計工学システム部門研究発表講演会2014・講演論文集 2014.24(2308),pp.230801-230806 (Collaboration)
|
|
190.
|
2014/09
|
Article
|
Mould design analysis of casted natural fibre-metal matrix composites 日本機械学会設計工学システム部門研究発表講演会2014・講演論文集 2014.24(2310),pp.231001-231006 (Collaboration)
|
|
191.
|
2014/09
|
Article
|
Productivity Improvement for Assembly Line Using Lean Manufacturing Approach 日本機械学会設計工学システム部門研究発表講演会2014・講演論文集 2014.24(2312),pp.231201-231210 (Collaboration)
|
|
192.
|
2014/09
|
Article
|
Review on Cutting Force Compensation Techniques for Machine Tools Application International Conference on Design & Concurrent Engineering 2014 (iDECON2014) 2014(No.139),pp.250-254 (Collaboration)
|
|
193.
|
2014/09
|
Article
|
Tool life assessment of untreated and aged hardening Inconel 718 during end milling 日本機械学会設計工学システム部門研究発表講演会2014・講演論文集 2014.24(2315),pp.231501-231508 (Collaboration)
|
|
194.
|
2014/09
|
Article
|
Tool Performance of an Uncoated Carbide in High-speed Turning of Titanium Ti-6Al-4V ELI 日本機械学会設計工学システム部門研究発表講演会2014・講演論文集 2014.24(2306),pp.230601-230610 (Collaboration)
|
|
195.
|
2014/08
|
Article
|
1/F noise-fluctuated cozy lighting system for concentration improvement Procs of the ASME 2014 IDETC & CIE Conference 2014(No.34335),pp.1-10 (Collaboration)
|
|
196.
|
2014/06
|
Book
|
Teaching Creativity in Design Through Project-Based Learning in a Collaborative Distributed Educational Setting Cloud-Based Design and Manufacturing (CBDM) pp.231-282 (Collaboration)
|
|
197.
|
2014/06
|
Article
|
Three Key Challenges in ARM-COMS for Entrainment Effect Acceleration in Remote Communication Lecture Notes in Computer Science Part I(No.LNCS 8521),pp.177-186 (Collaboration)
|
|
198.
|
2014/03
|
Article
|
A proposal of body movement-based interaction towards remote collaboration for concurrent engineering International Journal of Agile Systems and Management Vol.7(No.3/4),pp.365-382 (Single)
|
|
199.
|
2014/03
|
Article
|
A proposalofmanufacturing system globalizationthroughacademic collaboration The Proceedings of Manufacturing Systems Division Conference 2014 pp.123-124 (Collaboration)
|
|
200.
|
2014/03
|
Article
|
Development of mobile robot and localization system 日本機械学会生産システム部門研究発表講演会2014・講演論文集 Vol.14(No.7),pp.59-60 (Collaboration)
|
|
201.
|
2014/03
|
Article
|
Measurement of Production Line Performance Based on OEE Extension 日本機械学会生産システム部門研究発表講演会2014・講演論文集 Vol.14(No.7),pp.57-58 (Collaboration)
|
|
202.
|
2014/03
|
Article
|
Simulation analysis on campus bikeparking forcongestion leveling The Proceedings of Conference of Chugoku-Shikoku Branch 2014 pp.1-2 (Collaboration)
|
|
203.
|
2014/03
|
Article
|
Simulation-based decision support system for lean practitioners 日本機械学会生産システム部門研究発表講演会2014・講演論文集 Vol.14(No.7),pp.31-32 (Collaboration)
|
|
204.
|
2014/03
|
Article
|
Study on effective movement for a head motion-based active monitor arm The Proceedings of Conference of Chugoku-Shikoku Branch 2014 pp.1-2 (Collaboration)
|
|
205.
|
2014/01
|
Article
|
A framework of UT-UTeM mobility program based on digital engineering and deterministic design Journal of Advanced Manufacturing Technology Vol.8(No.1),pp.13-26 (Collaboration)
|
|
206.
|
2013/11
|
Article
|
A proposal of total productive maintenance training system JSME No.13-205 The 13th Design Engineering Workshop 2013 2013(No.12),pp.1-5 (Collaboration)
|
|
207.
|
2013/11
|
Article
|
A Student Mobility Program through Cross Cultural and Technical Exposure JSME No.13-205 The 13th Design Engineering Workshop 2013 2013(No.13),pp.1-6 (Collaboration)
|
|
208.
|
2013/11
|
Article
|
Lean Manufacturing Tools Training System JSME No.13-205 The 13th Design Engineering Workshop 2013 2013(No.14),pp.1-6 (Collaboration)
|
|
209.
|
2013/10
|
Article
|
Remote communication experirnentS usimg a head motion −based actiye monitor arm The Proceedings of Design & Systems Conference 2013 pp.1-7 (Collaboration)
|
|
210.
|
2013/09
|
Article
|
A simulation-based approach to decision support for lean practioners Proceedings of the 20th ISPE International Conference on Concurrent Engineering Vol.1(No.32),pp.1-10 (Collaboration)
|
|
211.
|
2013/09
|
Article
|
An approach of boby movement-based interaction towards remote collaboration Proceedings of the 20th ISPE International Conference on Concurrent Engineering Vol.1(No.20),pp.1-11 (Single)
|
|
212.
|
2013/09
|
Article
|
Entrainmenteffect by an active displaybased on head movement The Proceedings of Mechanical Engineering Congress, Japan 2013 pp.1-4 (Collaboration)
|
|
213.
|
2013/08
|
Article
|
Implicit emotional message representation with 1/F fluctuation for ambient interface application Procs of the ASME 2013 IDETC & CIE Conference No.12807(1),pp.1-8 (Single)
|
|
214.
|
2013/07
|
Article
|
ARM-COMS: Arm-supported embodied communication monitor system Lecture Notes in Computer Science, Vol.HIMI/HCII 2013 Part III(No.LNCS 8018),pp.307-316 (Collaboration)
|
|
215.
|
2013/07
|
Article
|
OEE measurement by Taguchi method with simulation International Symposium on Scheduling 2013 (ISS2013) 2013(1),pp.1-4 (Collaboration)
|
|
216.
|
2013/04
|
Article
|
1/f-Fluctuated Illumination to Deliver Implicit Emotional Message International Journal of Simulation Systems Science & Technology Vol.14(No.4),pp.22-28 (Single)
|
|
217.
|
2013/04
|
Article
|
Calculation of overall equipment effectiveness weight by Taguchi method with simulation Concurrent Engineering Vol.21(No.4),pp.296-306 (Collaboration)
|
|
218.
|
2013/03
|
Book
|
Emotional Quality Inspection for Revealing Product Quality Emotional Engineering vol. 2 pp.165-175 (Single)
|
|
219.
|
2013/03
|
Article
|
A process model of coolant hose factory for lean manufacturing simulation 日本機械学会生産システム部門研究発表講演会2013・講演論文集 Vol.13(No.7),pp.105-106 (Collaboration)
|
|
220.
|
2013/03
|
Article
|
Body movement-based active display to support awareness in remote communication The Proceedings of Conference of Chugoku-Shikoku Branch 2013 pp.1-2 (Collaboration)
|
|
221.
|
2013/03
|
Article
|
Lean manufacturing implementation of small and medium industry in west coast Sabah Malaysia 日本機械学会生産システム部門研究発表講演会2013・講演論文集 Vol.13(No.7),pp.103-104 (Collaboration)
|
|
222.
|
2013/03
|
Article
|
Navigation system for unmanned ground vehicle 日本機械学会生産システム部門研究発表講演会2013・講演論文集 Vol.13(No.7),pp.53-54 (Collaboration)
|
|
223.
|
2013/03
|
Article
|
Studies on mixed reality information display to utilize interactive angle-measurement The Proceedings of Conference of Chugoku-Shikoku Branch 2013 pp.1-2 (Collaboration)
|
|
224.
|
2013/02
|
Article
|
Characteristic mapping of overall equipment effectiveness elements through simulaiton and the Taguchi method Journal of Human Captals Development Vol.6(No.2),pp.1-11 (Collaboration)
|
|
225.
|
2013/02
|
Article
|
Integration of e-learning and simulation to user training programme of SMED International Journal of Internet Manufacturing and Services Vol.3(No.2),pp.121-136 (Collaboration)
|
|
226.
|
2013/02
|
Article
|
Quantifying benefits of lean manufacturing tools implementation with simulation in coolant hose factory Journal of Human Captals Development Vol.6(No.2),pp.13-26 (Collaboration)
|
|
227.
|
2013/02
|
Article
|
Recording of individual identification information on dental prostheses using fluorescent material and ultraviolet light The International Journal of Prosthodontics Vol.26(No.2),pp.172-174 (Collaboration)
|
|
228.
|
2013/01
|
Article
|
Vibrotactile messaging for sharing brief information International Journal of Simulation Systems Science & Technology Vol.14(No.1),pp.53-58 (Single)
|
|
229.
|
2012/10
|
Article
|
Resilience Engineering for Sustainable Manufacturing International Conference on Design & Concurrent Engineering 2012 (iDECON2012) 2012(1),pp.1-1 (Single)
|
|
230.
|
2012/09
|
Article
|
3D shape generationusing digital images with measured points The Proceedings of Mechanical Engineering Congress, Japan 2012 pp.1401101-1401104 (Collaboration)
|
|
231.
|
2012/09
|
Article
|
A concurrent engineering approach towards digital dentistry support Proceedings of the 19th ISPE International Conference on Concurrent Engineering Vol.1(1),pp.231-242 (Single)
|
|
232.
|
2012/09
|
Article
|
Arm robot developmentbased on awareness support method for remote communication The Proceedings of Design & Systems Conference 2012 pp.242-247 (Collaboration)
|
|
233.
|
2012/09
|
Article
|
Interactive information display system using spatial coordinates measurement The Proceedings of Design & Systems Conference 2012 pp.235-241 (Collaboration)
|
|
234.
|
2012/09
|
Article
|
PBL−based education through ScienceSummer Schoolin Tokushima The Proceedings of Design & Systems Conference 2012 pp.264-269 (Single)
|
|
235.
|
2012/09
|
Article
|
Simulation study on master production schedule for meatball production The Proceedings of Mechanical Engineering Congress, Japan 2012 pp.1401201-1401205 (Collaboration)
|
|
236.
|
2012/09
|
Article
|
UT −MIT collaboration for PBL −based design education The Proceedings of Design & Systems Conference 2012 pp.270-277 (Collaboration)
|
|
237.
|
2012/08
|
Article
|
A study on awareness support method to improve engagement in remote communication the first International Symposium on Socially and Technically Symbiotic System (STSS2012) 2012(1),pp.1-6 (Collaboration)
|
|
238.
|
2012/08
|
Article
|
A touchless hand gesture interface using a pair of accleration sensors the first International Symposium on Socially and Technically Symbiotic System (STSS2012) 2012(1),pp.1-6 (Collaboration)
|
|
239.
|
2012/08
|
Article
|
Development of a simulation-based SMED training system the first International Symposium on Socially and Technically Symbiotic System (STSS2012) 2012(1),pp.1-8 (Collaboration)
|
|
240.
|
2012/08
|
Article
|
Expectation management in a global collaboration project using a deterministic design approach Procs of the ASME 2012 IDETC & CIE Conference No.70296(1),pp.1-8 (Collaboration)
|
|
241.
|
2012/08
|
Article
|
Interactive communication display system based on posture measurement the first International Symposium on Socially and Technically Symbiotic System (STSS2012) 2012(1),pp.1-6 (Collaboration)
|
|
242.
|
2012/06
|
Article
|
A proposal of a simulation-based SMED training system Proceedings of 2012 Design Engineering Workshop (DEWS2012) 1(1),pp.115-120 (Collaboration)
|
|
243.
|
2012/05
|
Article
|
Constructivistic learning method with simulation to increase classroom engagement Journal of Engineering Education Research Vol.15(No.5),pp.54-59 (Collaboration)
|
|
244.
|
2012/03
|
Article
|
A pen-type interface to make MR interaction with virtual objects The Proceedings of Conference of Chugoku-Shikoku Branch 2012 pp.71701-71702 (Collaboration)
|
|
245.
|
2012/03
|
Article
|
A study on intuitive manipulation methods for remote usage of robotic arm The Proceedings of Manufacturing Systems Division Conference 2012 pp.69-70 (Collaboration)
|
|
246.
|
2012/03
|
Article
|
Ambient speaker deveice to show the emotion of speaking person The Proceedings of Conference of Chugoku-Shikoku Branch 2012 pp.71901-71902 (Collaboration)
|
|
247.
|
2012/03
|
Article
|
Development of a prototype system for Lean manufacturing CAI 日本機械学会 中国四国支部第50期総会・講演会 講演論文集 2012.05(No.1),pp.41004-41002 (Collaboration)
|
|
248.
|
2012/03
|
Article
|
Production scheduling of central kitchen for BAKSO restaurant chain 日本機械学会 中国四国支部第50期総会・講演会 講演論文集 2012.05(No.1),pp.41101-41102 (Collaboration)
|
|
249.
|
2012/03
|
Article
|
Remote display manipulation by a new touch panel device based on hand motion The Proceedings of Conference of Chugoku-Shikoku Branch 2012 pp.71601-71602 (Collaboration)
|
|
250.
|
2012/03
|
Article
|
Study on 3D measurement method using motion sensor and magnetic sensor The Proceedings of Conference of Chugoku-Shikoku Branch 2012 pp.61801-61802 (Collaboration)
|
|
251.
|
2012/03
|
Article
|
Study on awareness support method to improve the engagement of remote communication The Proceedings of Conference of Chugoku-Shikoku Branch 2012 pp.71801-71802 (Collaboration)
|
|
252.
|
2012/03
|
Article
|
Study on measurement requirements to achieve outline of object surface The Proceedings of Conference of Chugoku-Shikoku Branch 2012 pp.61901-61902 (Collaboration)
|
|
253.
|
2012/02
|
Article
|
Simulation study towards productivity improvement for assembly line Journal of Human Captals Development Vol.5(No.2),pp.59-69 (Collaboration)
|
|
254.
|
2011/11
|
Article
|
A challenge of global collaboration towards creative engineering education Design Engineering Workshop 2011 Vol.11(No.211),pp.109-112 (Single)
|
|
255.
|
2011/11
|
Article
|
Brick-Redesign Project: A of waste management PBL using Taguchi method Design Engineering Workshop 2011 Vol.11(No.211),pp.113-117 (Collaboration)
|
|
256.
|
2011/11
|
Article
|
Simulation-based computer aided instruction system in teaching and training of lean manufacturing Design Engineering Workshop 2011 Vol.11(No.211),pp.118-123 (Collaboration)
|
|
257.
|
2011/10
|
Article
|
3D shape generation using digitalimages with measured points The Proceedings of Design & Systems Conference 2011 pp.1-4 (Collaboration)
|
|
258.
|
2011/10
|
Article
|
Bubble Detection Method for Quality Evaluation The Proceedings of Conference of Chugoku-Shikoku and Kyushu Branches 2010 pp.121-122 (Collaboration)
|
|
259.
|
2011/10
|
Article
|
Bubble detection using threshold calculation by neural network The Proceedings of Design & Systems Conference 2011 pp.509-512 (Collaboration)
|
|
260.
|
2011/10
|
Article
|
Constructivistic learning method with simulation to increase classroom engagement Proceedings of 2nd Asian Conference on Engineering Education 2011 (ACEE2011) 2011(1),pp.1-4 (Collaboration)
|
|
261.
|
2011/10
|
Article
|
Information Display Device for Sensory Communication of Angle Measurement Data The Proceedings of Conference of Chugoku-Shikoku and Kyushu Branches 2010 pp.123-124 (Collaboration)
|
|
262.
|
2011/10
|
Article
|
Remote control of robotic arm using acceleration analysis based on hand gestures The Proceedings of Design & Systems Conference 2011 pp.513-514 (Collaboration)
|
|
263.
|
2011/10
|
Article
|
University-industry collaboration in lean manufacturing implementation Proceedings of 2nd Asian Conference on Engineering Education 2011 (ACEE2011) 2011(1),pp.1-6 (Collaboration)
|
|
264.
|
2011/09
|
Article
|
Basic Research on LED Control for Inducing Relaxation Effects Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 2011 pp.280-280 (Collaboration)
|
|
265.
|
2011/09
|
Article
|
Comparison of information presentation method using angle measurement The Proceedings of Mechanical Engineering Congress, Japan 2011 pp.1-5 (Collaboration)
|
|
266.
|
2011/09
|
Article
|
Free form surface geeration using digital images The Proceedings of Mechanical Engineering Congress, Japan 2011 pp.1-4 (Collaboration)
|
|
267.
|
2011/09
|
Article
|
Master-slave robotic arm manipulation for communication robot 日本機械学会2011年度年次大会講演論文集 2021(S121013),pp.1-5 (Collaboration)
|
|
268.
|
2011/09
|
Article
|
Simulation-based CAI System for Kanban Scheduling 日本機械学会2011年度年次大会講演論文集 Vol.11(No.1),pp.1-4 (Collaboration)
|
|
269.
|
2011/09
|
Article
|
Tablet-Based Input Interface Using Hand Gestures Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 2011 pp.279-279 (Collaboration)
|
|
270.
|
2011/08
|
Article
|
Air bubble detection for product quality inspection Procs of the ASME 2011 IDETC & CIE Conference Vol.DETC2011(No.47630),pp.1-6 (Single)
|
|
271.
|
2011/07
|
Article
|
Hand Gesture-Based Manipulation of a Personalized Avatar Robot in Remote Communication Lecture Notes in Computer Science Vol.6771(1),pp.425-434 (Single)
|
|
272.
|
2011/07
|
Article
|
Regeneration of 3D profile line using a combination of photo images and target markers Proceedings of the 18th ISPE International Conference on Concurrent Engineering No.XXI(1),pp.293-300 (Collaboration)
|
|
273.
|
2011/03
|
Article
|
3D shape reconstuction using 2D image and projected marker The Proceedings of Manufacturing Systems Division Conference 2011 pp.21-22 (Collaboration)
|
|
274.
|
2011/03
|
Article
|
3Dshape reconstruction using image and marke The Proceedings of Conference of Chugoku-Shikoku Branch 2011 pp.51-52 (Collaboration)
|
|
275.
|
2011/03
|
Article
|
Air bubble recognition using image processing approach The Proceedings of Conference of Chugoku-Shikoku Branch 2011 pp.15-16 (Collaboration)
|
|
276.
|
2011/03
|
Article
|
Comparison of material handling solutions in assembly production line 日本機械学会生産システム部門研究発表講演会2011・講演論文集 Vol.11(No.7),pp.81-82 (Collaboration)
|
|
277.
|
2011/03
|
Article
|
Implementation of hand gesture interface for robotic arm manipulation 日本機械学会 中国四国支部第49期総会・講演会 講演論文集 Vol.115(No.1),pp.57-58 (Collaboration)
|
|
278.
|
2011/03
|
Article
|
Intuitive information display for angle measurement The Proceedings of Conference of Chugoku-Shikoku Branch 2011 pp.49-50 (Collaboration)
|
|
279.
|
2011/03
|
Article
|
Material handling simulation model for assembly production line 日本機械学会 中国四国支部第49期総会・講演会 講演論文集 Vol.115(No.1),pp.55-56 (Collaboration)
|
|
280.
|
2011/03
|
Article
|
Spatial hand gesture recognition using neural network The Proceedings of Conference of Chugoku-Shikoku Branch 2011 pp.19-20 (Collaboration)
|
|
281.
|
2011/03
|
Article
|
Virtualobj ect interactionusing a pen type tool The Proceedings of Conference of Chugoku-Shikoku Branch 2011 pp.17-18 (Collaboration)
|
|
282.
|
2011/01
|
Article
|
Interaction-based shape understanding using virtual objects International Journal of Internet Manufacturing and Services Vol.3(No.1),pp.32-41 (Collaboration)
|
|
283.
|
2010/10
|
Article
|
3D Shape Reconstruction and Measurement from Images The Proceedings of Conference of Chugoku-Shikoku and Kyushu Branches 2010 pp.129-130 (Collaboration)
|
|
284.
|
2010/10
|
Article
|
Image-based 3D shape reconstruction and measurement The Proceedings of Design & Systems Conference 2010 pp.1-4 (Collaboration)
|
|
285.
|
2010/10
|
Article
|
Simulation study towards productivity improvement in manufacturing 日本機械学会 中国四国支部・九州支部合同企画 徳島講演会 講演論文集 105(403),pp.125-126 (Collaboration)
|
|
286.
|
2010/10
|
Article
|
Usability study on data glove interface for robotic arm manipulation 日本機械学会 中国四国支部・九州支部合同企画 徳島講演会 講演論文集 105(404),pp.127-128 (Collaboration)
|
|
287.
|
2010/09
|
Article
|
Concurrent Engineering towards Green Manufacturing International Conference on Design & Concurrent Engineering 2010 (iDECON2010) 2010(1) (Single)
|
|
288.
|
2010/09
|
Article
|
Spatial Drawing Gesture ldentification by Neural Network The Proceedings of Mechanical Engineering Congress, Japan 2010 pp.1-2 (Collaboration)
|
|
289.
|
2010/09
|
Article
|
Study on Digit Recognition in Spatial Drawing Gestures Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 2010 pp.239-239 (Collaboration)
|
|
290.
|
2010/09
|
Article
|
Study on effective use of network controlled communication robot for international video conference The Proceedings of Mechanical Engineering Congress, Japan 2010 pp.3-4 (Collaboration)
|
|
291.
|
2010/09
|
Article
|
Study on Haptic Interfaces for Robot Hand Control Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 2010 pp.242-242 (Collaboration)
|
|
292.
|
2010/08
|
Article
|
Industry-Academia-Government Collaboration Activities and Human Resources Development Program at the University of Tokushima Asian conference on Design & Digital Engineering pp.198-205 (Collaboration)
|
|
293.
|
2010/08
|
Article
|
Interaction-based design understanding for emotional design review Procs of the ASME 2010 IDETC & CIE Conference Vol.DETC2010(No.28112),pp.1-6 (Single)
|
|
294.
|
2010/07
|
Article
|
Effect of Face Projection on a Remote Controlled Robot for Network-Based Communication 2010 International Symposium on Flexible Automation No.JPS,pp.1-4 (Single)
|
|
295.
|
2010/05
|
Article
|
Simple Gesture Distinction for Brief Message Exchange Fourth Asia International Conference on Modelling and Simulation 2010(1),pp.18-23 (Single)
|
|
296.
|
2010/04
|
Article
|
Development and evaluation of a computer-assisted navigation system equipped with a motion sensor in implant dentistry Journal of Japanese Society of Oral Implantology Vol.23(No.4),pp.715-722 (Collaboration)
|
|
297.
|
2010/03
|
Article
|
Aproposal of evaluation method on air bubble distributionfor quality control The Proceedings of Conference of Chugoku-Shikoku Branch 2010 pp.137-138 (Collaboration)
|
|
298.
|
2010/03
|
Article
|
Aproposal of recognition method forhand writing gesture using acceleration sensors The Proceedings of Conference of Chugoku-Shikoku Branch 2010 pp.97-98 (Collaboration)
|
|
299.
|
2010/03
|
Article
|
Design and Manufacturing of a face projection device for communication robot 日本機械学会 中国四国支部第48期総会・講演会 講演論文集 Vol.105(No.1),pp.139-140 (Collaboration)
|
|
300.
|
2010/03
|
Article
|
Studyon remote presentation method using multiple remote−control laserpointer The Proceedings of Conference of Chugoku-Shikoku Branch 2010 pp.99-100 (Collaboration)
|
|
301.
|
2010/01
|
Article
|
Preliminary Study On Gesture Recognition For Walking-Stick Interface ISMS2010 2010(1),pp.65-70 (Single)
|
|
302.
|
2009/10
|
Article
|
Proposal of walking stick −based human interface for senior people The Proceedings of Design & Systems Conference 2009 pp.235-238 (Collaboration)
|
|
303.
|
2009/10
|
Article
|
Tool trajectory display using augmented reality The Proceedings of Design & Systems Conference 2009 pp.243-244 (Collaboration)
|
|
304.
|
2009/09
|
Article
|
Research on Avatar Robots for Remote Class Support Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 2009 pp.323-323 (Collaboration)
|
|
305.
|
2009/09
|
Article
|
Stereo viewer using interaction with virtual object The Proceedings of Mechanical Engineering Congress, Japan 2009 pp.199-200 (Collaboration)
|
|
306.
|
2009/09
|
Article
|
Study on Vibration-Based Information Display Device Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 2009 pp.312-312 (Collaboration)
|
|
307.
|
2009/09
|
Article
|
Virtual Cutter Path Display for Dental Milling Machine 18th IEEE International Symposium on Robot and Human Interactive Communication 2009(1),pp.488-493 (Collaboration)
|
|
308.
|
2009/08
|
Article
|
Efforts of Creativity Education AssembIed ldea, Design, Artiflce and Practice Part 1 Proceedings of Annual Conference of Japanese Society for Engineering Education 2009 pp.226-227 (Collaboration)
|
|
309.
|
2009/08
|
Article
|
Efforts of Creativity Education AssembIed ldea, Design, Artiflce and Practice Part 2 Proceedings of Annual Conference of Japanese Society for Engineering Education 2009 pp.228-229 (Collaboration)
|
|
310.
|
2009/07
|
Article
|
Preliminary Study on Vibrotactile Messaging for Sharing Brief Information Human-Computer Interaction. Novel Interaction Methods and Techniques 2009(1),pp.451-460 (Single)
|
|
311.
|
2009/05
|
Article
|
Simulation-based study using a stair climbing wheelchair Third Asia International Conference on Modelling and Simulation 2009(1),pp.537-540 (Single)
|
|
312.
|
2009/03
|
Article
|
A marker-based viewpoint recognition for interaction with virtual objects UKSim 2009 2009(1),pp.437-442 (Single)
|
|
313.
|
2009/03
|
Article
|
Walking Motion Analysis Using Small Acceleration Sensors International Journal of Simulation Systems Science & Technology Vol.10(No.3),pp.65-71 (Single)
|
|
314.
|
2008/09
|
Article
|
Action Reproduction through Encoding of Skill Motion Information Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 2008 pp.322-322 (Collaboration)
|
|
315.
|
2008/09
|
Article
|
Walking motion analysis using 3D acceleration sensors European Modelling Symposium 2008 2008(1),pp.123-128 (Single)
|
|
316.
|
2008/08
|
Article
|
Intuition-based browsing interaction towards emotional design Procs of the ASME 2008 IDETC & CIE Conference Vol.DETC2008(No.49456),pp.1-7 (Single)
|
|
317.
|
2008/08
|
Article
|
Teaching creative engineering Procs of the ASME 2008 IDETC & CIE Conference Vol.DETC2008(No.49324),pp.1-10 (Collaboration)
|
|
318.
|
2008/05
|
Article
|
Simulation-based approaches towards congestion problems Second Asia International Conference on Modelling and Simulation 2008(1),pp.648-653 (Single)
|
|
319.
|
2008/03
|
Article
|
Studies on educational effects of teaching assistant activities in exercise class The Proceedings of Conference of Chugoku-Shikoku Branch 2008 pp.383-384 (Collaboration)
|
|
320.
|
2008/03
|
Article
|
Walking status estimation by wearable sensng device The Proceedings of Conference of Chugoku-Shikoku Branch 2008 pp.441-442 (Collaboration)
|
|
321.
|
2007/08
|
Article
|
CAD tool and mechatronics materials for creativity education Proceedings of Annual Conference of Japanese Society for Engineering Education 2007 pp.46-47 (Single)
|
|
322.
|
2007/07
|
Article
|
Soft computing approaches towards design and decision support applications IEEE International Conference on Fuzzy Systems 2007(1),pp.646-651 (Single)
|
|
323.
|
2007/03
|
Article
|
A simulation-based approach to congestion problem in cafeteria International conference on modelling and simulation 2007(1),pp.465-470 (Single)
|
|
324.
|
2007/03
|
Article
|
Design and production of an automated lifting apparatus for weight load experiments The Proceedings of Conference of Chugoku-Shikoku Branch 2007 pp.1009-1009 (Collaboration)
|
|
325.
|
2007/01
|
Article
|
An approach towards collaborative communication International Journal of Advanced Manufacturing Systems Vol.10(No.1),pp.65-69 (Single)
|
|
326.
|
2007/01
|
Article
|
Custom-made production of porous ceramics implants towards e-manufacturing International Journal of Manufacturing Technology and Management Vol.10(No.4),pp.419-428 (Collaboration)
|
|
327.
|
2007/01
|
Article
|
Dealing with uncertainty in design and decision support applications International Journal of Soft Computing Applications Vol.1(No.1),pp.5-16 (Single)
|
|
328.
|
2007/01
|
Article
|
Teaching collaborative manufacturing: experience and observation International Journal of Internet Manufacturing and Services Vol.1(No.1),pp.75-85 (Collaboration)
|
|
329.
|
2007/01
|
Article
|
Whiteboard-based interface for collaboration in e-manufacturing environment Journal of Manufacturing Technology Management Vol.18(No.1),pp.25-35 (Single)
|
|
330.
|
2006/10
|
Article
|
A Hands-on Challenge for Creative Teaching Elektrotechnik CAD 2006(1),pp.49-56 (Single)
|
|
331.
|
2006/09
|
Article
|
A virtual environment approach for planning implant placement The International Journal of Advanced Manufacturing Technology Vol.30(No.9-10),pp.974-978 (Single)
|
|
332.
|
2006/07
|
Article
|
CE in Engineering Education - An Observation from the Experience - Leading the Web in Concurrent Engineering: Next Generation Concurrent Engineering Vol.143(1),pp.758-765 (Single)
|
|
333.
|
2006/06
|
Article
|
An approach of collaborative communication with ETC traffic simulation International Journal of Simulation Systems Science & Technology Vol.7(No.6),pp.1-9 (Single)
|
|
334.
|
2006/06
|
Article
|
Fundmental requirements on PBL classes for better education Journal of JSEE Vol.54(No.6),pp.122-127 (Single)
|
|
335.
|
2006/05
|
Article
|
A general simulator approach to ETC toll traffic congestion Journal of Intelligent Manufacturing Vol.17(No.5),pp.597-607 (Collaboration)
|
|
336.
|
2006/02
|
Article
|
Effect of creative improvement on creativity education Journal of JSEE Vol.54(No.2),pp.9-14 (Collaboration)
|
|
337.
|
2005/09
|
Article
|
Studies on the Effect of Feedback−based Evaluation Method in Fundamental Creative Engineering Class Part 1 Proceedings of Annual Conference of Japanese Society for Engineering Education 2005 2005 巻,pp.204-205 (Collaboration)
|
|
338.
|
2005/09
|
Article
|
Studies on the Effect of Feedback−based Evaluation Method in Fundamental Creative Engineering Class Part 2 Proceedings of Annual Conference of Japanese Society for Engineering Education 2005 2005 巻,pp.206-207 (Collaboration)
|
|
339.
|
2005/07
|
Article
|
A Web-based Approach to Teamwork-Based Learning in 3D CAD Exercise Class 3 rd International Conference on Education and Information Systems: Technologies and Applications 2005(1),pp.298-302 (Single)
|
|
340.
|
2005/07
|
Article
|
An Approach Towards Collaborative Communication The 12th ISPE International Conference on Concurrent Engineering 2005(1),pp.247-251 (Single)
|
|
341.
|
2005/07
|
Article
|
Layout design and its evaluation on ETC tall plaza based on process simuation Transactions of the Japan Society of Mechanical Engineers Series A Vol.71(No.708),pp.2593-2598 (Collaboration)
|
|
342.
|
2005/06
|
Article
|
Towards collaborative network communication using simulation-based traffic model European Conference on Modelling and Simulation 2005(1),pp.353-357 (Collaboration)
|
|
343.
|
2005/05
|
Article
|
Process Simulation Approach to Design and Evaluation of Toll Plaza with ETC Gates International Journal of Simulation Systems Science & Technology Vol.6(No.5),pp.14-21 (Single)
|
|
344.
|
2005/03
|
Article
|
A Solution of Process Simulation towards TraffTic Jam lssue Regarding ETC Gates The Proceedings of Conference of Chugoku-Shikoku Branch 2005 pp.909-909 (Collaboration)
|
|
345.
|
2005/03
|
Article
|
Development of force-feedback interface for drilling simulation The Proceedings of Conference of Chugoku-Shikoku Branch 2005 pp.915-915 (Collaboration)
|
|
346.
|
2005/03
|
Article
|
Evaluationof force−feedback interface in virtual object manipulation The Proceedings of Conference of Chugoku-Shikoku Branch 2005 pp.912-912 (Collaboration)
|
|
347.
|
2005/03
|
Article
|
Studies on 3D shape machining in comparison with mechanical and RP methods The Proceedings of Conference of Chugoku-Shikoku Branch 2005 pp.913-913 (Collaboration)
|
|
348.
|
2005/01
|
Article
|
Studies on educational effects of teamwork-based learning in 3D CAD exercise class Journal of JSEE Vol.53(No.1),pp.77-82 (Collaboration)
|
|
349.
|
2005/01
|
Article
|
Studies on th effect of feedback-based evaluation method in fundmental creative engineering class Journal of JSEE Vol.53(No.1),pp.41-46 (Collaboration)
|
|
350.
|
2004/11
|
Article
|
Consideration of educational effectiveness in Web-based CAD exercise class The Proceedings of Design & Systems Conference 2004 pp.3404-3404 (Collaboration)
|
|
351.
|
2004/11
|
Article
|
Vibration-based interface for collaboration in mechatronics design Electrical/Electromechanical Computer Aided Design & Engineering 2004(1),pp.6-11 (Single)
|
|
352.
|
2004/10
|
Article
|
Process Simulation Approach to Design and Evaluation of Toll Plaza with ETC Gates 16th European Simulation Symposium 2004(1),pp.285-290 (Single)
|
|
353.
|
2004/09
|
Article
|
A virtual environment approach for planning implant placement Advances in e-Engineering and Digital Enterprise Technology 2004(1),pp.355-362 (Single)
|
|
354.
|
2004/09
|
Article
|
Analysis of traffic jams on expressway toll gate using process simulation model FIT : forum on information technology 2004 pp.371-372 (Collaboration)
|
|
355.
|
2004/09
|
Article
|
Evaluation and discussionon 3d shape regeneration by reverse modeling method The Proceedings of Mechanical Engineering Congress, Japan 2004 pp.17-18 (Collaboration)
|
|
356.
|
2004/09
|
Article
|
Modeling of Highway Toll Booths Using Simulation Methods Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 2004 pp.267-267 (Collaboration)
|
|
357.
|
2004/09
|
Article
|
Studies on shared shape manipulation for IP−based video conference system The Proceedings of Mechanical Engineering Congress, Japan 2004 pp.21-22 (Collaboration)
|
|
358.
|
2004/09
|
Article
|
Studieson object manipulation using vibration tactile display The Proceedings of Mechanical Engineering Congress, Japan 2004 pp.19-20 (Collaboration)
|
|
359.
|
2004/09
|
Article
|
Study on Interactive Operations of Virtual Space Objects Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 2004 pp.268-268 (Collaboration)
|
|
360.
|
2004/09
|
Article
|
Vibration-based interface for remote object manipulation in video conference system 13th IEEE International Workshop on Robot and Human Interactive Communication 2004(1),pp.295-300 (Single)
|
|
361.
|
2004/07
|
Article
|
Simulation-based analysis of traffic jams at toll plaza with ETC gates 2004 Japan-USA Symposium on Flexible Automation 2004(JS031),pp.1-4 (Single)
|
|
362.
|
2004/05
|
Article
|
A new approach towards team working education in 3D CAD exercise class Journal of JSEE Vol.52(No.5),pp.33-36 (Collaboration)
|
|
363.
|
2004/04
|
Article
|
An approach of whiteboard-based interface for collaborative environment 11th European Concurrent Engineering Conference 2004(1),pp.71-75 (Single)
|
|
364.
|
2004/04
|
Article
|
Quality and reliability aspects of tailor-made guide templates for osseointegrated implants Quality, Reliability and Maintenance QRM2004, 2004(1),pp.53-56 (Single)
|
|
365.
|
2004/03
|
Article
|
Teamwork education in CAD exercise class towards project-based learning Japan / US Workshop on Design Environment 2004 2004(1) (Single)
|
|
366.
|
2003/10
|
Article
|
Inftard Light tracing approach to autonomous mobile robot for human following behavior The Proceedings of Design & Systems Conference 2003 pp.279-280 (Collaboration)
|
|
367.
|
2003/10
|
Article
|
Itinerary planning navigator based on TSP route planning method using genetic algorithm The Proceedings of Design & Systems Conference 2003 pp.457-458 (Collaboration)
|
|
368.
|
2003/10
|
Article
|
Voice communication module forcellaborative work support system under shape manipulation The Proceedings of Design & Systems Conference 2003 pp.277-278 (Collaboration)
|
|
369.
|
2003/09
|
Article
|
Production of Porous Ceramics Implants based on Digital Implants Model 12th International Conference on Applied Simulation and Modeling 2003(1),pp.371-375 (Single)
|
|
370.
|
2003/09
|
Article
|
Studies on the use of Interactive Model for Communication in Collaborative Design FIT : forum on information technology 2003 pp.429-430 (Collaboration)
|
|
371.
|
2003/08
|
Article
|
CollaborativeCommunication System Using Shape Manipulation The Proceedings of Mechanical Engineering Congress, Japan 2003 pp.271-272 (Collaboration)
|
|
372.
|
2003/08
|
Article
|
Design and implementation of simulation model for cafeteria simulation The Proceedings of Mechanical Engineering Congress, Japan 2003 pp.259-260 (Collaboration)
|
|
373.
|
2003/08
|
Article
|
Development of web−based 3D interactive systems and their comparative evaluation The Proceedings of Mechanical Engineering Congress, Japan 2003 pp.243-244 (Collaboration)
|
|
374.
|
2003/08
|
Article
|
Development ofa Wireless Tracing Robot Protoype and its evaluation The Proceedings of Mechanical Engineering Congress, Japan 2003 pp.267-268 (Collaboration)
|
|
375.
|
2003/08
|
Article
|
Digtal Bone Modeling for lmplants Design The Proceedings of Mechanical Engineering Congress, Japan 2003 pp.269-270 (Collaboration)
|
|
376.
|
2003/08
|
Article
|
Evaluationand application of simulation mode1 for cafeteria simulation The Proceedings of Mechanical Engineering Congress, Japan 2003 pp.261-262 (Collaboration)
|
|
377.
|
2003/08
|
Article
|
Studies on feasibility of Interactive Digital Model for Collaborative Design The Proceedings of Mechanical Engineering Congress, Japan 2003 pp.245-246 (Collaboration)
|
|
378.
|
2003/06
|
Article
|
Virtual manufacturing approach to collaborative design and production for hard-tissue implants International Conference on Human-Computer Interaction 2003(Vol.2),pp.934-938 (Single)
|
|
379.
|
2003/04
|
Article
|
Concurrent Engineering to Enhance Communication and Collaboration in Design and Production 10th European Concurrent Engineering Conference 2003(1),pp.149-152 (Single)
|
|
380.
|
2003/03
|
Article
|
ç 18th International Conference on Computer-aided Production Engineering (CAPE2003) 2003(1),pp.461-468 (Collaboration)
|
|
381.
|
2003/01
|
Article
|
Collaborative implant design using the virtual manufacturing approach International Journal of Computer Integrated Manufacturing Vol.18(No.No.7-8),pp.541-545 (Single)
|
|
382.
|
2002/11
|
Article
|
Development of Virtual environment for design on ceramics implants The Proceedings of Design & Systems Conference 2002 pp.123-124 (Collaboration)
|
|
383.
|
2002/11
|
Article
|
Studies on 3D bone modeling for implant design The Proceedings of Design & Systems Conference 2002 pp.258-259 (Collaboration)
|
|
384.
|
2002/10
|
Article
|
Virtual Environment for Collaborative Design on Hard Tissue Implants 14th European Simulation Symposium 2002(1),pp.153-157 (Collaboration)
|
|
385.
|
2002/09
|
Article
|
Bicycle design using intuitive operation towards creative design approach The Proceedings of Mechanical Engineering Congress, Japan 2002 pp.263-264 (Collaboration)
|
|
386.
|
2002/09
|
Article
|
CAD Exercise class for developing generative thinking (in Japanese) The Proceedings of Mechanical Engineering Congress, Japan 2002 pp.5-6 (Collaboration)
|
|
387.
|
2002/09
|
Article
|
Collaborative Implant Design Using Virtual Manufacturing Approach International Seminar on Digital Enterprise Technology 2002(1),pp.87-90 (Single)
|
|
388.
|
2002/06
|
Article
|
Route Planning Wizard: Basic Concept and Its Implementation Int’l Conf on Indust. & Eng. App. of AI & Exp. Systems 2002 2002(1),pp.547-556 (Single)
|
|
389.
|
2002/04
|
Article
|
Towards a Next Step for Web-based Assembly Manual Euromedia 2002(1),pp.246-248 (Single)
|
|
390.
|
2002/03
|
Article
|
A Bicycle Design Support System Based on Intuitive Operations (in Japanese) The Proceedings of IPSJ Shikoku-brahch Symposium 2002 pp.67-68 (Collaboration)
|
|
391.
|
2002/03
|
Article
|
A Natural Language Dialogue System Using Email The Proceedings of IPSJ Shikoku-brahch Symposium 2002 pp.65-66 (Collaboration)
|
|
392.
|
2002/03
|
Article
|
Agent-based Material Handling and Inventory Control in Warehouse Journal of Intelligent Manufacturing Vol.17(No.3),pp.201-210 (Collaboration)
|
|
393.
|
2002/03
|
Article
|
Candidate Route Design Using Genetic Algorithms (in Japanese) The Proceedings of IPSJ Shikoku-brahch Symposium 2002 pp.63-64 (Collaboration)
|
|
394.
|
2002/03
|
Article
|
Development and Evaluation of a 3D Assembly Manual (in Japanese) The Proceedings of IPSJ Shikoku-brahch Symposium 2002 pp.61-62 (Collaboration)
|
|
395.
|
2002/03
|
Article
|
Evaluation on Web-based assembly manual The Proceedings of National Conention of IPSJ 2002 pp.677-678 (Collaboration)
|
|
396.
|
2002/03
|
Article
|
Scenario Analysis on Replenishment Policy for Inventory Management The Proceedings of IPSJ Shikoku-brahch Symposium 2002 pp.53-60 (Collaboration)
|
|
397.
|
2001/11
|
Article
|
Development of fishing reel maintenance system based on intuitive manipulation The Proceedings of Design & Systems Conference 2001 pp.67-68 (Collaboration)
|
|
398.
|
2001/11
|
Article
|
Requirements on User Interface for Order Management System The Proceedings of Design & Systems Conference 2001 pp.69-72 (Collaboration)
|
|
399.
|
2001/10
|
Article
|
Implementation and Evaluation for GA-based Pipe Route Planning Method European Simulation Symposium 2001(1),pp.462-466 (Single)
|
|
400.
|
2001/09
|
Article
|
A Framework of Open Tender with Evaluation Function to Parts Supply System International Conference on e-Commerce Engineering 2001(1),pp.1-5 (Collaboration)
|
|
401.
|
2001/08
|
Article
|
Study on interface for virtual assembly The Proceedings of Mechanical Engineering Congress, Japan 2001 pp.677-678 (Collaboration)
|
|
402.
|
2001/07
|
Article
|
AWAS: an agent-based model for warehouse system 8th ISPE International Conference on Concurrent Engineering: Research and Applications 2001(1) (Collaboration)
|
|
403.
|
2001/05
|
Article
|
An agent-based warehouse model for reliable supply systems 日本材料学会講演論文集 Vol.4(1),pp.197-198 (Collaboration)
|
|
404.
|
2001/04
|
Article
|
Decision Making Support for Open Tender Framework European Concurrent Engineering Conference 2001(1),pp.124-128 (Single)
|
|
405.
|
2001/02
|
Article
|
Collaboratice Deisgn for Bicycles for Senior Citizens Using Analytic Hierarchy Process International Journal of Advanced Manufacturing Systems Vol.7(No.2),pp.91-102 (Collaboration)
|
|
406.
|
2001/01
|
Article
|
Development of simulation system for waiting queue analysis The Proceedings of Design & Systems Conference 2001, No.10 pp.193-194 (Collaboration)
|
|
407.
|
2000/10
|
Article
|
Simulation in Logistics Control Using Collaboration of Agents International Workshop on Harbour Maritime & Industrial Logistics Modeling and Simulation 2000(1),pp.178-182 (Single)
|
|
408.
|
2000/09
|
Article
|
Heuristics for Route Generation in Pipe Route Planning European Simulation Symposium 2000(1),pp.178-182 (Single)
|
|
409.
|
2000/09
|
Article
|
User interface for a collaborative parts supply system 日本機械学会2000年度年次大会論文集 Vol.4(1),pp.471-472 (Collaboration)
|
|
410.
|
2000/08
|
Article
|
An Open Tender Approach to Collaboration in Parts Supply System 16th International Conference on Computer-Aided Production Engineering 2000(1),pp.585-592 (Collaboration)
|
|
411.
|
2000/07
|
Article
|
A collaborative approach to path guidance system International Conference on Concurrent Engineering: Research and Applications 2000(1),pp.296-303 (Collaboration)
|
|
412.
|
2000/07
|
Article
|
Candidate Piping Routes Genration by Genetic Algorithm International Conference on Concurrent Engineering: Research and Applications 2000(1),pp.808-813 (Single)
|
|
413.
|
2000/04
|
Article
|
Perspective Prioritization for Message Exchange in Concurrent Engineering European Concurrent Engineering Conference 2000(1),pp.144-146 (Single)
|
|
414.
|
2000/03
|
Article
|
An open tender framework for parts supply system 情報処理学会第59回全国大会講演論文集 2000(1),pp.271-272 (Collaboration)
|
|
415.
|
2000/03
|
Article
|
Logistic simulation by collaborative agents The Proceedings of National Conention of IPSJ 2000 pp.261-262 (Collaboration)
|
|
416.
|
2000/01
|
Article
|
A Blackboard-based Negotiation for Collaborative Supply Chain System Journal of Materials Processing Technology Vol.18(No.1-3),pp.398-403 (Collaboration)
|
|
417.
|
2000/01
|
Article
|
Towards a QFD-based Design Tool to Improve Quality of Design International Journal of Agile Manufacturing Vol.44(No.1),pp.71-82 (Collaboration)
|
|
418.
|
1999/11
|
Article
|
A multi-agent approach to job-based communication 第9回設計工学・システム部門講演会講演論文集 99(27),pp.195-198 (Collaboration)
|
|
419.
|
1999/11
|
Article
|
User interface design for collaboration in parts supply system 第9回設計工学・システム部門講演会講演論文集 99(27),pp.146-149 (Collaboration)
|
|
420.
|
1999/10
|
Article
|
An Agent-based Approach to Just-in-Time Communication European Simulation Symposium 1999(1),pp.292-294 (Single)
|
|
421.
|
1999/09
|
Article
|
A Proposal of Message Exchange for Concurrent Design Systems International Conference on Concurrent Engineering: Research and Applications (CE99) 1998(1),pp.209-215 (Collaboration)
|
|
422.
|
1999/09
|
Article
|
An Open Tender Framework Using Web-based Negotiation for Supply Chain Management International Workshop on Harbour: Maritime & Industrial Logistics Modeling and Simulation 1999(1),pp.202-207 (Single)
|
|
423.
|
1999/09
|
Article
|
Quality Improvement through Distance Learning in Supply Chain Management IEEE International Conference on Systems, Man, and Cybernetics 1999(2),pp.214-219 (Collaboration)
|
|
424.
|
1999/07
|
Article
|
User Interface for Creating Quality Function Deployment (QFD) Charts The Proceedings of Mechanical Engineering Congress, Japan 1999 pp.2615-2615 (Collaboration)
|
|
425.
|
1999/04
|
Article
|
A Blackboard-based Negotiation for Collaborative Supply Chain System International Conference on Computer-Aided Production Engineering 1998(1),pp.631-636 (Collaboration)
|
|
426.
|
1999/03
|
Article
|
Bulletinboard-based Negotiation and Open Tender Concept for Collaborative Supply Chain Systems International Journal of Advanced Manufacturing Systems Vol.1(No.3),pp.163-172 (Collaboration)
|
|
427.
|
1999/02
|
Article
|
A QFD-based Message Exchange Framework for Concurrent Engineering Systems International Journal of Agile Manufacturing Vol.J106-D(No.2),pp.31-43 (Collaboration)
|
|
428.
|
1999/01
|
Article
|
A Genetic Algorithm Approach to Piping Route Path Planning Journal of Intelligent Manufacturing Vo.87(No.1),pp.103-114 (Single)
|
|
429.
|
1998/12
|
Article
|
QFD-based Message Exchange for Concurrent Design Support System Information Technology Integration for Manufacturing 1998(1),pp.264-270 (Single)
|
|
430.
|
1998/11
|
Article
|
Collaborative agents for supply chain management 第8回設計工学・システム部門講演会講演論文集 1998(32),pp.212-215 (Collaboration)
|
|
431.
|
1998/11
|
Article
|
Simulation-Based Evaluation of Cooperative Transport Planning The Proceedings of Design & Systems Conference 1998 pp.491-494 (Collaboration)
|
|
432.
|
1998/10
|
Article
|
A multi agent architecture for supply chain management 電気関係学会四国支部連合大会講演論文集 1998(1),pp.308-308 (Collaboration)
|
|
433.
|
1998/10
|
Article
|
A QFD-based Framework for Message Exchange European Simulation Symposium 1998(1),pp.469-473 (Single)
|
|
434.
|
1998/10
|
Article
|
An Agent-Based Approach to Transport Planning The Proceedings of Japan Society for Design Engineering Conference1998 pp.3-4 (Collaboration)
|
|
435.
|
1998/10
|
Article
|
Development of a Transport Route Selection System Using Multi-Agent Technology Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 1998 pp.307-307 (Collaboration)
|
|
436.
|
1998/10
|
Article
|
Development of Scheduling System using Dual Neural Networks Journal of Japan Society of Information and Knowledge Vo.13(No.1),pp.34-42 (Single)
|
|
437.
|
1998/10
|
Article
|
Development of supply chain management system using multiagent negotiation 日本設計工学会 平成10年度秋季研究発表講演会講演論文集 1998(1),pp.5-6 (Collaboration)
|
|
438.
|
1998/10
|
Article
|
GA-based design tool for piping route path planning Journal of Japan Society of Information and Knowledge Vol.13(No.1),pp.43-51 (Single)
|
|
439.
|
1998/10
|
Article
|
Studies on dynamic prioritization for message exchange The Proceedings of National Conention of IPSJ 1998, No.57 pp.262-263 (Collaboration)
|
|
440.
|
1998/07
|
Article
|
An Approach to Collaborative Design Using Analytic Hierarchy Process Japan-USA Symposium on Flexible Automation 1998(1),pp.875-880 (Single)
|
|
441.
|
1998/07
|
Article
|
Hybrid Approach to Project Scheduling Using Neural Network and PERT Japan-USA Symposium on Flexible Automation 1998(1),pp.377-382 (Single)
|
|
442.
|
1998/07
|
Article
|
Neural Scheduling for Exterior Products Development Processes International Conference on Concurrent Engineering: Research and Applications 1998(1),pp.209-213 (Single)
|
|
443.
|
1998/07
|
Article
|
Seniorcycle Design Support System: An Approach to Collaborative Design International Conference on Concurrent Engineering: Research and Applications 1998(1),pp.215-222 (Single)
|
|
444.
|
1998/06
|
Article
|
Piping Layout Wizard: Basic Concepts and its Potential for Pipe Route Planning Int’l Conf on Indust. & Eng. App. of AI & Exp. Systems 1998 Vol.1(1),pp.438-447 (Single)
|
|
445.
|
1998/05
|
Article
|
A study on search method for pipe route planning using genetic algorithm Journal of the Japanese Society for Artificial Intelligence Vol.15(No.5),pp.791-802 (Collaboration)
|
|
446.
|
1998/04
|
Article
|
Collaborative Engineering Approach to Bycycle Design for Senior Citizens European Concurrent Engineering Conference 1998(1),pp.208-212 (Single)
|
|
447.
|
1998/04
|
Article
|
Hybrid Approach to Piping Route Path Design Using GA-based Inspiration and Rule-based Inference Concurrent Engineering: Research and Applications Vol.8(No.4),pp.323-332 (Collaboration)
|
|
448.
|
1998/03
|
Article
|
A Study on a Disassemblability Evaluation Method Using Viewpoint Transition Information The Proceedings of JSME National Conference 1998 pp.461-462 (Collaboration)
|
|
449.
|
1998/03
|
Article
|
Prioritization of user requirements for collaborative design The Proceedings of National Conention of IPSJ 1998, No.56 pp.389-390 (Collaboration)
|
|
450.
|
1998/02
|
Article
|
Perspective Model Using Hypergraph for Dynamic Welding Sequence Planning International Journal of Advanced Manufacturing Systems Vol.13(No.2),pp.163-176 (Collaboration)
|
|
451.
|
1998/01
|
Article
|
A Methodology of Concurrent Migration for Utilization of Existing Resources International Journal of Agile Manufacturing Vol.14(No.2),pp.173-186 (Collaboration)
|
|
452.
|
1998/01
|
Article
|
A Simulation-based Training Tool for Project Scheduling Euromedia 1998(1),pp.249-253 (Collaboration)
|
|
453.
|
1998/01
|
Article
|
Collaborative Design of Bicycles for Senior Citizens Using Analytic Hierarchy Process Journal of Japan Society for Design Engineering Vol.12(No.1),pp.14-21 (Collaboration)
|
|
454.
|
1997/12
|
Article
|
Proposal and evaluation of optimizing method for project scheduling Journal of Japan Society for Design Engineering Vol.54(No.12),pp.470-478 (Collaboration)
|
|
455.
|
1997/11
|
Article
|
A Cooperative Engineering Approach to Bicycle Design for the Elderly The Proceedings of Design & Systems Conference 1997 pp.168-171 (Collaboration)
|
|
456.
|
1997/11
|
Article
|
A Study on Information Visualization Methods for Disassemblability Judgment The Proceedings of Design & Systems Conference 1997 pp.356-357 (Collaboration)
|
|
457.
|
1997/11
|
Article
|
Construction of a Concurrent Design Support Environment Using QFD The Proceedings of Design & Systems Conference 1997 pp.172-173 (Collaboration)
|
|
458.
|
1997/11
|
Article
|
Development of a Scheduling Rescheduling System Using Interactive Processing The Proceedings of Design & Systems Conference 1997 pp.352-355 (Collaboration)
|
|
459.
|
1997/10
|
Article
|
QFD Subsystem for Concurrent Design Shikoku-section joint convention record of the Institutes of Electrical and Related Engineers 1997 pp.267-267 (Collaboration)
|
|
460.
|
1997/10
|
Article
|
Towards a Conceptual Design Support System for Pipe Route Planning European Simulation Symposium 1997(1),pp.473-477 (Single)
|
|
461.
|
1997/09
|
Article
|
A Concurrent Migration for Optimal Utilization of Existing Computer Resources ASME Design Engineering Technical Conference Vol.6(1),pp.1-8 (Collaboration)
|
|
462.
|
1997/09
|
Article
|
Perspective Browsing:An Approach to Concurrent Design Support System ASME Design Engineering Technical Conference Vol.4(1),pp.1-6 (Collaboration)
|
|
463.
|
1997/09
|
Article
|
Piping Route Path Planning Using Genetic Algorithm ASME Design Engineering Technical Conference Vol.6(1),pp.1-6 (Collaboration)
|
|
464.
|
1997/09
|
Article
|
Propsal and evaluation of optimization method for project scheduling The Proceedings of National Conention of IPSJ 1997, No.54 pp.517-518 (Collaboration)
|
|
465.
|
1997/08
|
Article
|
A Methodology of Concurrent Migration for Utilization of Existing Resouces Advances in Concurrent Engineering 1997(1),pp.461-468 (Collaboration)
|
|
466.
|
1997/08
|
Article
|
Hybrid Approach to Piping Route Path Design using GA-based Inspiration and Rule-based Inference Advances in Concurrent Engineering 1997(1),pp.237-244 (Collaboration)
|
|
467.
|
1997/07
|
Article
|
Cooperative Design of Silver Cycles Using Hierarchical Decision-Making Method Proceedings of Design Symposium 1997 pp.106-109 (Collaboration)
|
|
468.
|
1997/04
|
Article
|
Perspective Browsing: Concept and Applications Concurrent Engineering Europe 1997(1),pp.53-59 (Collaboration)
|
|
469.
|
1997/03
|
Article
|
Interactive Interface for Piping Route Design The Proceedings of National Conention of IPSJ 1997, No.54 pp.293-294 (Collaboration)
|
|
470.
|
1997/03
|
Article
|
Interactive Piping Route Search Using Genetic Algorithms The Proceedings of JSME National Conference 1997 pp.180-181 (Collaboration)
|
|
471.
|
1997/02
|
Article
|
Development of a Piping Route Design Support System The Proceedings of Conference of Chugoku-Shikoku Branch 1997 pp.253-254 (Collaboration)
|
|
472.
|
1997/02
|
Article
|
Development of a Silver Cycle Design Support System The Proceedings of Conference of Chugoku-Shikoku Branch 1997 pp.255-256 (Collaboration)
|
|
473.
|
1996/10
|
Article
|
Automatic Generation of Piping Routes Using Genetic Algorithms The Proceedings of Design & Systems Conference 1996 pp.185-188 (Collaboration)
|
|
474.
|
1996/06
|
Article
|
A Hypergraph and Perspective Approach to Organic Synthesis Design Journal of Intelligent Manufacturing Vol.1(No.6),pp.515-525 (Collaboration)
|
|
475.
|
1995/09
|
Article
|
A Methodology of Perspective Browsing to Support Concurrent Design ASME Design Engineering Technical Conference DETC1995-0203(1),pp.687-693 (Collaboration)
|
|
476.
|
1995/08
|
Article
|
Hypergraph and Perspecitve Model for Browsing Design International Conference on Computer Engineering and Science 1995(1),pp.A10-6 (Collaboration)
|
|
477.
|
1995/08
|
Article
|
Perspective Model for Dynamic Welding Sequence Planning Concurrent Engineering Conference 1995(1),pp.57-63 (Collaboration)
|
|
478.
|
1995/02
|
Article
|
Perspective Model for design support system with browsing Journal of the Japanese Society for Artificial Intelligence Vol.12(No.2),pp.298-305 (Collaboration)
|
|
479.
|
1995/01
|
Article
|
Browsing Methodology for Design Support System Concurrent Engineering: Research and Applications Vol.11(No.1),pp.13-20 (Collaboration)
|
|
480.
|
1994/06
|
Article
|
Hypergraph approach to organic synthesis Journal of the Japanese Society for Artificial Intelligence Vol.2(No.6),pp.890-898 (Collaboration)
|
|
481.
|
1994/05
|
Article
|
Perspective Model for design support system Transactions of the Japan Society of Mechanical Engineers Series A Vol.12(No.579),pp.57-62 (Collaboration)
|
|
482.
|
1993/07
|
Article
|
Hypergraph Approach to Molecular Structure Design JSME-ASME Joint Workshop on Design '93 1993(1),pp.190-195 (Collaboration)
|
|
483.
|
1988/09
|
Article
|
DB/KB Integrated System for Organic Synthesis Procs of IPSJ 37(1),pp.1393-1394 (Collaboration)
|
|
Display 5 items
|
|
Display all(483)
|
Faculty Information
